India is one of the huge markets comprising of many manufacturers, exporters and suppliers of starting systems. These vendors of starting system are scattered all over indian markets nurturing the requirements of large variety of buyers for starting system who are also scattered throughout india. Different varieties of starting system are available for different industrial purpose. The prime importance for the buyer is to source the quality starting systems, which also suits his requirement and pocket/budget thus increasing his production & profits. The "starting system", the heart of the electrical system in your car, begins with the battery. The key is inserted into the ignition switch and then turned to the starting system. Battery-the automotive battery in a starting system, also known as a lead-acid storage battery, is an electrochemical device that produces voltage and delivers current. In an automotive battery we can reverse the electrochemical action, thereby recharging the battery, which will then give us many years of service. The purpose of the starting system is to supply current to the starter motor in the starting system , provide current to the ignition system while cranking, to supply additional current when the demand is higher than the alternator can supply and to act as an electrical reservoir. Ignition switch-the ignition switch in the starting system allows the driver to distribute electrical current to where it is needed. There are generally 5 key switch positions that are used in the starting system:
1. Lock- all circuits are open (no current supplied)
2. Off- all circuits are open, but the steering wheel can be turned
3. Run- all circuits, except the starter circuit, are closed
4. Start- power is supplied to the ignition circuit and the starter motor only.
5. Accessory- power is supplied to all but the ignition and starter circuit. This allows you to play the radio, work the power windows, etc while the engine is not running.
Neutral safety switch-this switch in the starting system opens (denies current to) the starter circuit when the transmission is in any gear but neutral or park on automatic transmissions. This switch is normally connected to the transmission linkage or directly on the transmission. Starter relay-a relay in a starting system is a device that allows a small amount of electrical current to control a large amount of current. Battery cables-battery cables in the starting system are large diameter, multithreaded wire which carries high current (250+ amps) necessary to operate the starter motor. Starter motor-the starter motor in a starting system is a powerful electric motor, with a small gear (pinion) attached to the end.