India is one of the huge markets comprising of many manufacturers, exporters and suppliers of friction clutch. These vendors of friction clutch are scattered all over indian markets nurturing the requirements of large variety of buyers for friction clutch who are also scattered throughout india. Different varieties of friction clutch are available for different industrial purpose. The prime importance for the buyer is to source the quality friction clutch, which also suits his requirement and pocket/budget thus increasing his production & profits.Slip clutches / friction clutches can be used as torque limiters, tensioning devices and overrun devices. Compact slip clutches/friction clutches are adjustable and have a wide range of torque. Set screw or clamp fixing and inch and metric bores are available. The construction of slip clutches /friction clutches is simple and robust. Friction clutch is comprised of a series of steel plates engaging a hub and a series of friction rings engaging housing. Pressure is put on the plates and friction rings by an adjuster acting through a spring and pressure plate. Torque of slip clutch ranges from 130 ncm (11.7 inch-lbs) to 846 ncm (74 inch-lbs) (constant torque slip clutch. Friction clutches are built in oldham coupling (277/285 series) for misalignment applications. A friction clutch transfers torque between two driveline axes by coupling them with friction. The controllable friction clutch block models a standard friction clutch with kinetic friction and static (locking) friction acting on the two axes. The motion is measured as the slip of follower (f) axis relative to base (b) axis, ? = ?f - ?b. The clutch requires a dimensionless input pressure signal p that modulates the applied kinetic friction. This signal should be positive or zero. A signal p less than zero are interpreted as zero. A signal p of unity corresponds to the full normalized kinetic friction.
Friction clutches have pairs of conical, disk, or ring-shaped mating surfaces and means for pressing the surfaces together. The pressure may be created by a spring or a series of levers locked in position by the wedging action of a conical spool. Friction clutch is a mechanical clutch that transmits torque through surface friction between the faces of the clutch. These small, user-adjustable torque limiters are suitable for concentric or in-line mounting. They operate by friction using interleaved clutch plates and interrupt rotation when the load being transmitted reaches a pre-determined threshold. They are used in all kinds of small drives to help protect personnel and equipment.
